35C8 STEEL INTRODUCTION

35C8 is a type of low-carbon steel that is commonly used in the manufacturing of various industrial and mechanical components. Its properties include a low carbon content, good ductility, and a moderate level of strength.

Uses:

• 35C8 is commonly used to manufacture gears, shafts, and other mechanical components that require moderate strength and good ductility.
• It is also used to construct structures and parts that require good weldability and formability.

Properties:

• 35C8 has a low carbon content of around 0.35%, which gives it good ductility and formability.
• It has a moderate level of strength, with a yield strength of around 240 MPa.
• It has a good level of weldability and machinability.
• 35C8 has a low hardenability, meaning that it cannot be hardened by heat treatment.

Heat Treatment:

• 35C8 does not require heat treatment as it is low-carbon steel.
• It can be annealed to improve its ductility and formability.

Machining:

• 35C8 is relatively easy to machine, with good machinability ratings.
• It can be machined using conventional cutting tools such as drills, taps, and end mills.
• It may require slightly more cutting force than higher carbon steels, but it can still be machined with good results.

35C8 steel bar is a relatively low cost, medium strength and medium carbon steel and is commonly used in a wide variety of general purpose applications. 35c8 round bar is higher in strength and hardness as compared low carbon steel and is often used for small parts of moderate strength such as bolts, nuts, studs and parts which are headed or upset.

We can provide you 35C8 steel in the following size range:-